Should You Polish Your Rolex? A Watchmaker's View
TL;DR: Polish a modern steel Rolex you wear every day if the scratches bother you and its edges are still sharp. Leave a vintage Rolex, or any watch whose value rests on originality, as it is. Every polish removes metal that cannot be put back, so it should always be your decision, never a default.
Owners who bring a Rolex to our Hatton Garden workshop for servicing and repair often ask about Rolex polishing. Most have read that polishing ruins a watch, and most also want the scratches gone.
Both are partly true. Here is how our refinishers decide, what a polish actually removes, and what it costs.
What a polish actually does
A polish levels scratches by taking away a thin layer of steel or gold around them. The deeper the scratch, the more metal has to go before the surface is flat again.
Most steel Rolex sports cases combine two finishes: brushed (satin) surfaces on the tops of the lugs and the bracelet, and mirror-polished flanks and bevels. A careful refinish restores each surface to its original finish and keeps a crisp line between the two.
A careless one runs the whole case over a buffing wheel. The brushed grain disappears, the bevels round off, and the lugs end up thinner and softer than Rolex made them.
That is the difference you are paying for. The machine is the same in every workshop; the restraint is not.
When polishing makes sense
A modern watch you wear daily. A steel Datejust or Submariner that goes on the wrist every morning will pick up scratches on the clasp and bracelet within months. If the case edges are still sharp, a light refinish brings it back without changing its shape.
A clasp that has taken the brunt. The clasp sits flat on desks and keyboards and wears faster than anything else on the watch. It is often the only part that needs attention.

The clasp above came in with heavy surface wear and deposits around the coronet. Cleaning and a light refinish deal with this without touching the case.
When the case is open anyway. During a full service the case and bracelet are taken apart, which is the best time to refinish them. Doing it separately later means opening the watch again.
When to leave it alone
Vintage references. On an older Rolex, collectors look closely at the lugs, bevels and case shape. A case that has never been polished, or polished only lightly, is worth more than one that has been reshaped. Our guide on whether a vintage Rolex is worth servicing covers why originality matters so much on these.
Sharp edges and crown guards. If your Submariner or GMT-Master still has defined bevels and crisp crown guards, light scratches are a fair trade for keeping them.
Engraving and stamped text. The coronet and lettering on the clasp, and any engraving you have added, soften with every heavy polish. We mask or avoid them where we can.
Ceramic and sapphire. Cerachrom ceramic bezel inserts and sapphire crystals are not polished. A scratch-resistant surface that has been damaged is replaced as a part, not refinished.
A watch you are about to sell. Many dealers and collectors would rather judge a watch unpolished. Ask before you refinish one you intend to part with.

Polishing during a Rolex service
Rolex’s own servicing procedure says the middle case, bezel, case back and bracelet are re-polished or satin-finished “on request”, and its UK price list shows polishing as optional at £140 on a modern or classic watch. Put your preference in writing whichever route you use.
At SwissMade, refinishing is optional on every Rolex full service. We ask before the case goes near a wheel, and the work is listed on your written estimate.
A Rolex full service starts from £675 for an automatic and £975 for a Daytona. The full breakdown, including what refinishing adds, is in our guide to Rolex service costs in the UK.
What Rolex polishing costs
At SwissMade, watch polishing and refurbishment starts from £150, with a typical turnaround of 2–3 weeks. The final figure depends on what needs doing.
| What affects the price | Why |
|---|---|
| Case only, or case and bracelet | A full bracelet has dozens of surfaces to refinish by hand |
| Steel, gold or two-tone | Gold is softer and takes longer to refinish without losing shape |
| Depth of the damage | Deep gouges and dents need more than a polish and are quoted after inspection |
| With or without a service | Refinishing during a full service avoids opening the case twice |
Across the UK, independent polishing for a steel Rolex generally starts at around £150. Be wary of much lower prices: the difference is usually how much care goes into keeping the edges.
A word on polishing cloths
Polishing cloths and pastes sold for home use remove metal in the same way, without any control over edges or the line between brushed and polished. On a steel Rolex they tend to blur the brushed finish first.
The exception is an acrylic crystal on an older Rolex, where a light plastic polish to lift scuffs is standard practice and takes no metal at all.
Frequently asked questions
Does polishing a Rolex devalue it?
On a vintage Rolex, often yes: collectors pay more for cases with original lug shape and sharp bevels, and a heavy polish removes both. On a modern steel Rolex, a light refinish that keeps the original finishes has little effect on value. A careless polish that rounds the edges can hurt any Rolex.
Does Rolex polish your watch during a service?
Rolex’s published servicing procedure says the case and bracelet are refinished on request. State your preference in writing when you hand the watch over. At SwissMade we ask before any refinishing and list it on your estimate.
How much does it cost to polish a Rolex in the UK?
At SwissMade, watch polishing and refurbishment starts from £150, with a typical turnaround of 2–3 weeks. The final price depends on whether the bracelet is included, the metal, and how deep the scratches are. Refinishing can also be added to a Rolex full service, which starts from £675.
Can you polish scratches out of a Rolex bracelet?
Yes. Light scratches on the brushed links and the clasp can be refinished, and polished centre links, where the bracelet has them, can be buffed. Deep gouges take more metal to level, so we may advise leaving them softened rather than fully removed to keep the links from thinning.
How many times can a Rolex be polished?
There is no fixed number. It depends on how much metal each polish took. A watch that has had several light, careful refinishes can still look right; one heavy polish can do more harm than five light ones. We look at the lugs and bevels before advising.
Book a refinish or a service
Send us your Rolex and our refinishers will tell you honestly whether it needs a polish, a light refresh or nothing at all. The inspection is free if you go ahead. If you decide not to, a £30 Return Undone Fee covers the inspection, admin and insured return postage.
Start Your Repair or call us on 020 7405 8504.
Prefer to post it? Request a free insured postage pack and your Rolex is covered up to £25,000 on the way to us.
SwissMade is an independent watch repairer and is not affiliated with, authorised or endorsed by Rolex SA. Rolex and all Rolex model names are trademarks of Rolex SA.